INTERVIEW

January 12, 2022

Maxtena designs and manufactures advanced antenna solutions based on their patented Dynamic Aperture Technology TM (DAT). The companny’s antennas empower customers to develop unparalleled solutions for...

INTERVIEW WITH ZACROS AMERICA

January 12, 2022

Zacros America is a flexible packaging manufacturer focusing on sustainability with specialties in liquid packaging. The company provides monolayer and multilayer packaging products, including bulk liquid...

INTERVIEW WITH HEMERIA

January 5, 2022

HEMERIA is a space and defense company, designing and manufacturing high-end systems. The company is involved with the French MOD and the French Space Agency to develop the future of national capabilities....

INTERVIEW WITH GREENMAX

January 4, 2022

In an increasing world of concrete, pavement and buildings, it is the mission of GreenMax to create a sustainable, green living environment. The company strives for a healthy balance between green, gray and...

SMART BUILDING MANAGEMENT CAN SIGNIFICANTLY REDUCE THE CARBON FOOTPRINT, SAYS TOMÁŠ CHADIM FROM DOMAT CONTROL SYSTEM

January 4, 2022

INTERVIEW, SOLUTIONS

Most buildings today have automatically integrated indoor management systems. For example, they adjust the heating or lighting according to the occupancy of the premises automatically, without human...

INTERVIEW WITH ABNOX

January 3, 2022

Wherever production processes have to run as smoothly as possible, the specialists of the Swiss ABNOX AG can bring their competence to bear. For 75 years, ABNOX AG has been a leading system provider for...

INTERVIEW WITH ALCI GROUP

December 24, 2021

Alci Group is an Italian company whose aim is to stand alongside its clients to assist in finding solutions to the critical points of their production processes. More specifically, the company is divided into...

INTERVIEW WITH MITSUBISHI GAS CHEMICAL

December 23, 2021

Mitsubishi Gas Chemical is one of Japan’s leading chemical manufacturers, leading the way in developing innovative technologies that are beneficial in today’s society. The company’s motto is to offer...

INTERVIEW WITH POWUNITY

December 22, 2021

PowUnity started in the winter sports sector and launched an IoT solution for skis and snowboards. More and more retail partners then asked PowUnity to develop a similar product for e-bikes so, in 2018, the...

INTERVIEW WITH VALDINOX

December 22, 2021

VALDINOX is a highly specialized manufacturer of Wire mesh CABLE TRAYS, supports and accessories since 1982. Based in Spain, VALDINOX has a production capacity of 20.000 metres of basket cable trays per day....

INTERVIEW WITH THRACE GROUP

December 21, 2021

Thrace Group is a Greek multinational Group, founded in 1977 in Xanthi, Greece. Through a successful strategic development course has developed into one of the largest producers of Technical Fabrics &...

INTERVIEW WITH RX SOLUTIONS

December 21, 2021

Created in 2006, RX Solutions has developed a broad range of high performance of X-ray radioscopy and microtomography systems and offers also fast CT scanning and inspection services. The RX...

INTERVIEW WITH PREMIER CONTROL TECHNOLOGIES

December 21, 2021

Premier Control Technologies is an instrumentation company specializing in flow and pressure measurement and control, gas systems such as humidification/vaporization and low to ultra-low pump solutions. The...

INTERVIEW WITH KREISEL ELECTRIC

December 21, 2021

Kreisel Electric GmbH & Co KG is an international battery solution-provider based in Rainbach, Austria. The company was founded in 2014 by the three brothers Johann, Markus and Philipp Kreisel and is one...

INTERVIEW WITH FRANKEN-SCHOTTER

December 20, 2021

Franken-Schotter is limestone quarrier and producer, specialized in the quarrying and manufacturing of Jura limestone. The company owns and operates their own quarries in close vicinity to their...

INTERVIEW WITH FIBRECOAT

December 20, 2021

FibreCoat develops and markets high-performance fibre materials. The aluminium basalt fiber "AluCoat" is the first market-ready product. Unlike currently used conductive polymer yarns, AluCoat is thermally...

INTERVIEW WITH ETURNITY

December 20, 2021

Eturnity specializes in digital solutions along the life cycle of distributed energy systems such as PV systems, heating systems and e-mobility solutions. Along the whole life cycle there are a lot of time...

INTERVIEW WITH INDONESIA POLYURETHANE INDUSTRY

December 20, 2021

Indonesia Polyurethane Industry, PT or to be called IPI, is an Indonesian company with more than 25 years of experience in polyurethane processing. The company has been expanded to rubber, engineered-plastic,...

INTERVIEW WITH PAL-V INTERNATIONAL

December 17, 2021

PAL-V International BV is a Dutch company which started in 2008 with the development of the world’s first commercial flying car. The concept became reality when the Proof-of-concept took his first...

INTERVIEW WITH MENTPACK

December 17, 2021

Mentpack is established in 1996 as a very small start-up. A small workshop with 2 employees started to build very simple packaging machines. Over 25 years, Mentpack became a worldwide key player company in...

INTERVIEW WITH MELEXIS

December 17, 2021

Combining a passion for technology with truly inspired engineering, Melexis designs, develops and delivers innovative micro-electronic solutions that enable designers to turn ideas into applications that...

INTERVIEW WITH INBALANCE

December 17, 2021

Founded in 2019, Inbalance is an innovator of EV charging infrastructure solutions. The company develops, manufactures, and operates smart electric car charging stations and is a charging network operator....

INTERVIEW WITH WIESE EUROPE

December 16, 2021

Wiese Europe is a well-established family business with over 30 years of experience in the transfer of liquids and gasses with a specialization in chemicals and hazardous products. The company provides a...

INTERVIEW WITH PAXLY

December 16, 2021

PAXLY is a young German-Austrian Startup that wants to digitalize the purchasing processes in the packaging industry, especially the communication with customers and suppliers. PAXLY is a digital supplier...

Interview with ROQ Laser

December 15, 2021

ROQ Laser is a European industrial company focused on adding value to the products and services that it provides to its customers.Technologically advanced and certified, it operates according to Kaizen...

Interview with Karizma Luce

December 15, 2021

Karizma Luce is a young Dutch lighting brand that has made an international name for itself in just a short period of time. The company manufactures premium LED lighting fixtures that are suitable for...

NESS – YOUR PARTNER FOR PROCESS HEATING SOLUTIONS. SOLUTIONS FOR PROCESS HEATING SYSTEMS FOR MORE THAN 55 YEARS

December 14, 2021

For more than 55 years, Ness has been developing solutions for process heating systems in Remshalden near Stuttgart. The company employs more than 90 people in development, planning, sales, manufacturing and...

INTERVIEW WITH FLEXLOG

December 14, 2021

Flexlog GmbH is an innovative company based in Karlsruhe (Germany) and was founded in 2012 as a spin-off from KIT. With the claim to fundamentally change the conveyor technology and intralogistics industry,...

INTERVIEW WITH SMP PARTS

December 14, 2021

SMP Parts develop, produce, and distribute sustainable attachments for the excavator industry. The company has a broad range of product from Safety Quick Couplers, Tiltrotators and Buckets. Their mission is...

INTERVIEW WITH SENSEERING

December 14, 2021

senseering envisions Industrial IoT and Industrial Sustainability Strategies for innovative companies and implement them together with customers. The senseering® IoT solutions are the leading impulse giver...

INTERVIEW WITH GRIJSEN

December 14, 2021

Grijsen is a supplier of high-quality and stylish street furniture. The quality of the street furniture is a top priority at Grijsen. Grijsen has a diverse range, ranging from waste bins to outdoor benches...

INTERVIEW WITH BIKETEC

December 14, 2021

Biketec is a spin-off of the Swiss e-bike pioneer FLYER and acts on the market as an independent company since July 1, 2020 and is a bundling of competencies relating to fit for simple and customized e-bike...

INTERVIEW WITH BENEVELLI

December 14, 2021

Benevelli was founded in 1962. The company is located exactly in the heart of the Motor Valley, between the provinces of Modena and Reggio Emilia. This area has seen the growth and development of engines and...

INTERVIEW WITH REFRION

December 13, 2021

Founded in 2002 with the name Xchange, today Refrion is the leader in the production and development of liquid cooler and fan condensers used in the cooling sector of the industrial process, energy...

INTERVIEW WITH POOLYNK

December 13, 2021

Easy Engineering: A brief description of the company and its activities. POOLYNK: Digitizing the administration of outstanding pallets and containers along the supply chain is the core activity of...

INTERVIEW WITH KDV FLOW LIMITED

December 13, 2021

KDV Flow Limited is a world-renowned manufacturer of industrial flow control products and accessories. The company has over 40 years experience of providing abrasive and corrosive flow control solutions and...

INTERVIEW WITH FUHR

December 13, 2021

The basis of FUHR’s product range is formed by individual components from the area of wire forming. Their customers apply these components in their production lines – whether for the modernizing of...

INTERVIEW WITH REDEX GROUP

December 13, 2021

REDEX Group is a truly European engineering group specialized in supplying advanced solutions for high precision industries with the aim to be always at the top of the few world leaders in each of its high...

INTERVIEW WITH R.A JONES

December 13, 2021

R.A Jones is a global leader in the design and manufacturing of innovative packaging technologies and process solutions. R.A Jones’ advanced machines and high-speed equipment are state of the art and built...

CHALLENGES IN THE FIELD OF ACTIVITY. WHAT SOLUTIONS DOES MEMOLUB OFFER?

December 10, 2021

Memolub offers a wide range of quality class single-point automatic lubrication & multi-point automatic lubrication systems to help extend equipment life, increase productivity, and provide a safer work...

BEHIND THE MACHINE. WHAT’S BEHIND KITOV.AI’S BEST-SELLING PRODUCTS?

December 10, 2021

Kitov.ai is a team of smart visual inspection pioneers that develop a fully automated system for a broad range of production lines and markets. Kitov.ai’s systems help manufacturers reduce costs and improve...

INTERVIEW WITH GEDA

December 10, 2021

GEDA, one of the leading manufacturers of hoists for the industry and the construction sector, is seeing continuous growth and applies the highest quality standards in its manufacturing processes. The company...

THE CHALLENGES IN MIMAKI’S FIELD OF ACTIVITY. THE SOLUTIONS THEY OFFER

December 10, 2021

Founded in 1975 in Tomi-shi, Nagano, Japan, Mimaki is a leading manufacturer of wide-format inkjet printers and cutting plotters. The company supplies industrial printers, cutting plotters and their...

THE CHALLENGES IN P.W. BUD-MASZ’S FIELD OF ACTIVITY. THE SOLUTIONS THEY OFFER

December 8, 2021

P.W. BUD-MASZ is one of the largest producers in Central and Eastern Europe, working for customers since 1990. Over 30 years of experience allowed them to gain clients all over the world. What their clients...

INTERVIEW WITH SENYA CRUSHERS

December 3, 2021

Senya Crushers and their partner companies have been manufacturing aggregate processing and mining equipment for almost 60 years. The company has been world leaders in the technology of the field, including...

INTERVIEW WITH SIBA

December 3, 2021

SIBA is a family-owned mid-size fuse manufacturer. The company develops and produces their products exclusively at the head office in Lünen, Germany. SIBA is however represented worldwide by 10 subsidiaries...

CHALLENGES IN RESINO’S FIELD OF ACTIVITY. THE SOLUTIONS THEY OFFER

December 3, 2021

Resino Inks is an expert in reactive inks for flexographic, gravure and inkjet printing. The company delivers a wide range of high-quality inks, in particular water-based, solvent-based and UV curing inks,...

INTERVIEW WITH AMPNER

December 2, 2021

Ampner provides products and services for connecting renewable energy sources to the grid. The company is based in Vaasa, Finland, which is the largest energy technology concentration of the Nordic countries...

COMPREDICT, VEHICLE INSIGHTS THROUGH VIRTUAL SENSORS

November 29, 2021

COMPREDICT is a deep-tech startup based in Darmstadt/Germany. They provide the automotive and mobility industries with software algorithms and analytics that enable large-scale exploitation of in-vehicle...

BEHIND THE MACHINE. WHAT’S BEHIND EPUTEC’S BEST-SELLING PRODUCTS

November 26, 2021

Compressed air is used intensely in all areas of industry and trade. The possible applications are manifold and comprehensive. Reliability means availability. Compressed air is just as important for...

INTERVIEW WITH FINEPOWER

November 25, 2021

Finepower is an internationally operating engineering and distribution company with focus on modern power electronic applications. Since 2001, the company is a competent and reliable partner for the global...

INTERVIEW WITH EKEY

November 25, 2021

ekey started in 2002 and is today Europe’s number 1 for fingerprint access solutions. With ekey, people become authorized – and not objects. Keys, cards and codes can be lost, forgotten or stolen, but the...

INTERVIEW WITH ECO GREEN ENERGY

November 25, 2021

Eco Green Energy (EGE in short) is a French brand company that specializes in the research, development, production and sales of solar PV products. The factory and headquarter are located in Nantong, in the...

INTERVIEW WITH CY-LASER

November 24, 2021

It all started as a challenge and it has become the leading technology for sheet metal cutting. As a manufacturer of fiber laser cutting and welding systems, Cy-Laser is considered to be a world leading...

INTERVIEW WITH ARMATEC

November 24, 2021

ARMATEC is a well-established supplier of agitators, pumps, and additional tank accessories for the biogas, wastewater, and industrial sector. Founded in 1965, Armatec started out inventing pumps and...

INTERVIEW WITH TAV VACUUM FURNACES

November 23, 2021

TAV VACUUM FURNACES is an Italian company founded in 1984 by Mr Tonini and a group of entrepreneurs active in the field of heat treatments. The strong entrepreneurial spirit, engineering skills and hard work...

INTERVIEW WITH SLICE ENGINEERING

November 23, 2021

Slice Engineering makes components for 3D printers. They are a Florida, USA based company that seeks to improve the thermodynamics of the 3D printing process. Easy Engineering: What are the main...

INTERVIEW WITH ROCO9

November 23, 2021

Roco9 is a family-owned company based in Northern Ireland. It's a proud fact to say that over 70% of the worlds Mobile Crushing and Screening products are all produced inside a 40-mile zone, and Roco is...

INTERVIEW WITH BEENERGY SG

November 18, 2021

BeEnergy SG GmbH offers a standardized live monitoring solutions for smart grids. The Smart Grid Interface Module (SGIM) is a ready-to-use system to monitor measured electrical values in sub-stations and...

INTERVIEW WITH ADAMOS

November 18, 2021

ADAMOS was founded as a strategic alliance for the future topics of Industry 4.0 and the Industrial Internet of Things (IIoT). ADAMOS stands for ADAptive Manufacturing Open Solutions and is the first alliance...

INTERVIEW WITH ROBUSO

November 17, 2021

ROBUSO is family-run company in 4th generation. Since 1919, high-quality scissors for industrial use are handmade in Solingen. For many decades, ROBUSO has specialized in the production of scissors for the...

INTERVIEW WITH PAUL MASCHINENFABRIK

November 17, 2021

INTERVIEW, TECH, Woodworking Industry

PAUL MASCHINENFABRIK is a medium-sized family business from Southern Germany, which is internationally active and manufactures and sells machines and equipment for industrial woodworking and prestressed...

INTERVIEW WITH OPERVAL

November 17, 2021

In 1947, Luigi Prando opened his small workshop, repairing bikes and motorbikes. This is the turbulent period after the war and the will to start out afresh and is firmly fixed in the heart and mind of Luigi...

INTERVIEW WITH ML POLYOLEFINS

November 17, 2021

GREEN, INTERVIEW

Interview with Krzysztof Nowosielski, Commercial Director at ML Polyolefins. Easy Engineering: A brief description of the company and its activities. Krzysztof Nowosielski: We have been operating...

TMC: THE FUTURE OF TRANSFORMERS’ WORLD

November 12, 2021

TMC Transformers Group is a European company active worldwide, leader in the manufacture of medium and low voltage dry type transformers and reactors both using cast resin and VPI technology. It is a company...

INTERVIEW WITH GREENMANTRA

November 12, 2021

GREEN, INTERVIEW, TECH

GREENMANTRA is the first company in the world to upcycle challenging plastic waste streams into specialty additives and waxes for the plastic and asphalt industries. The vision for...

INTERVIEW WITH AWL

November 12, 2021

AWL is a private company with over 600 employees worldwide. As a system integrator, AWL delivers added value as a specialist in designing and constructing smart (modular) machines. With branches in the...

INTERVIEW WITH GOLDBECK SOLAR

November 10, 2021

GOLDBECK SOLAR is an international company specialized in the turnkey construction of industrial, commercial, and large-scale photovoltaic plants for free fields or rooftops. The team of engineers specialized...

INTERVIEW WITH PLASTICS ENGINEERING GROUP

November 10, 2021

The Plastics Engineering Group (PEG) is a team of around 15 highly experienced simulation engineers. The main focus and experience lie within the process and mechanical simulation of plastic components, molds...

INTERVIEW WITH NATÉOSANTÉ

November 10, 2021

NatéoSanté, designer and manufacturer of professional air purifiers, has been the French specialist in indoor air quality (IAQ) for over 12 years. Founded in 2009, the company is based in north-western...

BEHIND THE MACHINE. BEHIND FLOW ROBOTICS’ BEST-SELLING PRODUCTS

November 10, 2021

Flow Robotics A/S is a Danish robotics company with a vision of making liquid handling automation accessible to all. The company does this by breaking down technology barriers with the intuitive and...

BEHIND THE MACHINE. BEHIND ROQ’S BEST-SELLING PRODUCTS

November 9, 2021

ROQ Group is an industrial company, vertically integrated, internationally recognized for its quality, durability, reliability and innovation, characteristics supported by a team of about 630 people that...

BEHIND THE MACHINE. BEHIND CLEANSPACE’ BEST-SELLING PRODUCTS

November 9, 2021

CleanSpace is the definition of innovation and quality, combining world-class expertise with ongoing training and support. CleanSpace Technology was established in 2009 when a world-class medical device...

INTERVIEW WITH PICAVI

November 9, 2021

INTERVIEW, LOGISTIC

Picavi is an award-winning full-service provider of wearables for logistics, with leading expertise in the use of augmented and assisted reality in the warehouse. Picavi's Pick-by-Vision solution is the...

INTERVIEW WITH DOZOP

November 9, 2021

INTERVIEW, LOGISTIC

Dozop’s mission is to design and develop ready-to-assemble do-it-yourself products for everyday personal logistic needs. Many of them nowadays have little or no space to store at home, while the industry...

INTERVIEW WITH NEEL

November 8, 2021

The NEEL company was established in 1993 by a group of former employees of the Railway Scientific and Technical Centre (now: Railway Institute) in Warsaw, Poland. For many years, the main scope of the...

INTERVIEW WITH IMEM

November 8, 2021

IMEM is a company dedicated to the design, manufacture, installation and maintenance of lifts ever since 1968. IMEM is one of the most active and important manufacturers in the European market whose...

INTERVIEW WITH GRUPO CRESPO VIDRIO

November 8, 2021

Grupo Crespo Vidrio is the third generation of a family business focused on glass machinery manufacturing and engineering. The company is located in Burgos (Spain) as well as their glass processing factory...

INTERVIEW WITH DESERT SABER

November 8, 2021

Desert Saber, LLC is based in Tucson, Arizona, USA. The company was spun out of the University of Arizona to commercialize serious games for occupational training. “Saber” is Spanish...

BEHIND THE MACHINE. BEHIND SHERPA CONNECTION SYSTEMS’ BEST-SELLING PRODUCTS

November 5, 2021

SHERPA Connection Systems GmbH is an Austrian company, which got founded in 2012. The first product-generation though already launched 10 years prior to that. Two years later their connectors, which are...

BEHIND THE MACHINE. BEHIND BLIRT’S BEST-SELLING PRODUCTS

November 5, 2021

BLIRT, Biolab Innovative Research Technologies, is a European Biotech Company that commenced as a Technical University spin-off over 25 years ago to become a well-established recombinant enzyme manufacturer...

BEHIND THE MACHINE. BEHIND VALVENGINEERING’S BEST-SELLING PRODUCTS

November 4, 2021

INDUSTRY, INTERVIEW, TECH

Valvengineering was formed in 2007 to bring to market a range of hygienic valves qualitatively superior to the offerings currently on the market. The target markets are the pharmaceutical sector, fine...

INTERVIEW WITH SINUTA FCE

November 4, 2021

Sinuta FCE is a spin-off of SINUTA – World Leader in DTH Solutions, dedicated to Cold Cutting and Stamping Tools Development. SINUTA FCE, focused on clients’ demand, analyzes, develops and...

INTERVIEW WITH SEIFERT ELECTRONIC

November 4, 2021

Electronics and heat are like fire and water. In order to safely dissipate the heat from components and assemblies and to minimize failures due to overheating, Seifert Electronic has been realizing...

INTERVIEW WITH MERCAN

November 3, 2021

Mercan is established in 1988 by two mechanical engineers. At the very beginning years, the company completed the production of some turnkey plants, mobile equipment and different kind of automated production...

INTERVIEW WITH KLEINER

November 3, 2021

KLEINER GmbH is located in Pforzheim (Germany). The company specializes in stamping technology and has been in business since 1985. About 250 employees are working every day to bring the orders to...

BEHIND THE MACHINE. BEHIND ERREBI TECHNOLOGY’S BEST-SELLING PRODUCTS

November 3, 2021

Easy Engineering: A short description of your company and activities. Errebi Technology: Once upon a time…. All fairytales and nice stories start in this way. All traditional novels show that...

INTERVIEW WITH EPUTEC DRUCKLUFTTECHNIK

November 2, 2021

Compressed air is used intensively in all areas of industry and trade. The possible applications are manifold and comprehensive. Reliability means availability. Compressed air is just as important for...

BEHIND THE MACHINE. BEHIND EDGETECH’S BEST-SELLING PRODUCTS

November 2, 2021

Edgetech Europe GmbH, located in Heinsberg Germany, is a fully-owned subsidiary of Quanex Building Products Corporation, an industry-leading manufacturer of components sold to Original Equipment Manufacturers...

INTERVIEW WITH ULTIMATE EUROPE

November 2, 2021

ULTIMATE is a very successful international group of companies with approximately 1800 employees and worldwide locations in Austria, Poland, Romania, Turkey, USA, China and Australia. ULTIMATE Europe,...

INTERVIEW WITH KREON

November 1, 2021

KREON is a French manufacturer of 3D contact and non-contact measuring solutions. Having specialized in 3D scanners for almost 30 years, the company also offers a full range of measuring arms. All KREON...

INTERVIEW WITH GETECH

November 1, 2021

GeTech Srl is an Italian company with more than 20 years of experience in the supply of industrial technical parts. The company is one of the leaders in the Italian market. In the course of the past 10 years,...

INTERVIEW WITH C&F

November 1, 2021

C&F is an Italian company with deep roots into steel metalworking and machining. The company designs, develops, tests and manufactures compact, high-performance and long-lasting machines. They believe in...

EXCELLENT PERFORMANCE WITH MAXIMUM SAFETY

November 1, 2021

Blasting large-scale components is a painstaking process - and not entirely without its hazards. With specially designed blasting robots, such work can be carried out faster and safer, as well as more...

INTERVIEW WITH ECARUP

October 27, 2021

INTERVIEW, NEWS

eCarUp is a flexible platform to easily monitor, rent, intelligently control and bill EV charging stations in private and semi-private (and some instances public) use cases. Stations owners can easily add...

INTERVIEW WITH CHRISTOPHEL

October 27, 2021

CONSTRUCTION MACHINERY, INTERVIEW

When Johannes Christophel founded his company Christophel GmbH in 1983 in Germany to sell used machinery, he probably had no idea how it would develop. Now - almost 40 years later - Christophel GmbH...

INTERVIEW WITH ALBIAN GROUP

October 27, 2021

Albian Group designs, produces and sets up a wide variety of solutions for Clean Rooms. Their more than 34 years of expertise, together with the ability to be innovative and the team’s skills, makes Albian...

INTERVIEW WITH OPTIMUM

October 27, 2021

Optimum is specialized in intelligent image processing that combines digitization, database management and camera technology. The IT expert team from Karlsruhe has been automating and optimizing the processes...

PLANRADAR DIGITIZES CONSTRUCTION SITE MANAGEMENT. THE NEW DIGITAL SOLUTION FOR CONSTRUCTION AND REAL ESTATE NOW AVAILABLE IN ROMANIA

October 26, 2021